MTS – Drum to Drum Transfer with Open Containment

Choose a configuration below.
Request Brochure

LEARN MORE ABOUT
CONTAINMENT OPTIONS



Material Transfer Station Drum to Drum Transfer with Open Containment

Drum to Drum Transfer with Open Containment

The EHS Material Transfer Station is a small footprint workstation that improves operator safety and efficiency during the material transfer and weighing process. The operator workstation with the integrated drum tipper provides a compact, GMP, ergonomic means of transferring material.

The Material Transfer Station with Open Containment is designed for simple open transfers. Containment levels of less than 10 µg/m3 can be achieved via the integrated EHS Ventilation Sleeve.

EHS has conducted containment verification tests on the Material Transfer Station. The tests showed excellent results for each of the different configurations tested. Copies of the executive summary, full reports, and supplemental documentation are available upon request.

The Drum to Drum configuration is used to transfer materials between drums in order to repackage the material into a more GMP container or to pre-weigh a material kit using the integrated scale. The newly packaged drums can then be transported to a manufacturing space for batch processing.



Features

The Material Transfer Station with Open Containment has several benefits when implemented in the manufacturing process:

  • Ergonomic Product Transfer
  • Quick Deployment
  • Limited Cleaning Time
  • Modular Design
  • Customizable Glovebag
  • Portable Dispensing Suite
  • Containment (<1 µg/m3)
  • Small Footprint
Material Transfer Station Drum to Drum Transfer with Open Containment

Drum Tipper:

Integrated Drum Tipper with Powered Drum Slide for easy dispensing.

Handles:

Designed to help ergonomically position the Material Transfer Station.

Load Cells for Weighing:

integrated weighing with washdown load cells for cleanability.

Casters:

non-marking rigid or swivel casters for GMP compliance.

Operator Controls:

wash down control pendant on articulating arm with momentary push button controls and optional weighing readout.

Fold-Down Table:

used for bags and small containers, folds out of the way for ease of transport.

Drum Support Module:

integrated wash-down rollers make it easy to slide drums in and out.

Drum to Drum Transfer Module

Integrated EHS Ventilation Sleeve:

can be used to achieve containment levels of less than 10 µg/m3.


Open Transfer System for EHS Solutions Material Transfer Station

Open Transfer System

The Drum to Drum Transfer Module is designed to hold the receiving drum liner so product can easily be transferred into the receiving drum. For Open Containment, a drum liner can be band-clamped to the bottom ring of the transfer module while the integrated EHS Ventilation Sleeve provides containment across the top of the transfer module opening. Using this process to provide containment has been documented to keep operator particle exposure to less than 10 µg/m3. The containment module can rotate up to help with the clamping and unclamping of the drum liner.



Dust Extraction

The integrated EHS Ventilation Sleeve provides localized dust extraction to contain airborne dust and vapor. The full perimeter slot design provides 360 degrees of extraction to ensure that proper air velocity is maintained in the dust zone despite obstructions, such as an operator’s hands or a drum liner.

EHS has conducted containment performance verification tests on the Material Transfer Station. The tests showed excellent results for each of the different configurations tested. Copies of the executive summary, full reports, and supplemental documentation are available upon request.


Dust Extraction for EHS Solutions Material Transfer Station with Open Containment

Material Transfer Station - common applications for EHS Solutions equipment

Common Applications

  • Weigh and Dispense
  • Repackaging
  • Sampling
  • Charge Pot Filling


Integrated Weighing

The integrated weighing system provides a compact solution for the weighing and dispensing operation. The weighing module that holds the receiving container is isolated from the workstation to provide excellent weighing accuracy.

The typical integrated weighing system includes the following features:

  • 150 kg Weighing Capacity
  • Mettler Toledo IND570 or IND560X Readout
  • 4X Mettler Toledo Load Cells
  • Load Cell and Readout are Washdown Rated for Cleanability
  • Weigh Accuracy to +/- 50 grams
  • Can be Integrated with Computer, PLC, or Printer
  • High accuracy, low capacity options are available

Integrated weighing option - EHS Solutions

Integrated drum tipper from EHS Solutions

Drum Tipper

The integrated pneumatic Drum Tipper can be used to lift a wide variety of incoming containers and slide it towards the operator for easy dispensing into the receiving container. Pneumatic controls provide safe, controlled operation of the Material Transfer Station.

  • 150 kg Drum Capacity
  • Pneumatic Drive System (90 psig, 8 scfm Clean, Compressed Air)
  • Material of Construction: 304 Stainless Steel Frame Structure, 316 Stainless Steel Drum Cradle and Product Contact Surfaces


Common Specifications [customized per application]

Load Capacity 330 lbs [150 kg]
Maximum Drum Size 24 inches [610 mm] diameter, 36 inches [920mm] height
Material of Construction 304 stainless steel frame structure, 316 stainless steel drum cradle and product contact surfaces
Surface Finish Product Contact Area: 25 µin [0.64 µm] Ra with ground and polished welds
Non-Product Contact Area: 35 µin [0.89 µm] Ra with smooth welds as laid
Utility Air: 90 PSIG [6.2 bar]
Electric: 120 VAC, 60 Hz
Exhaust 450 CFM [212 L/s]
Controls momentary push button controls on wash-down control pendant
Integrated Weighing weighing capacity up to 150 kg
calibrated to 0.05 kg readability
Hazardous Rating configurable for use in Hazardous Locations: Class I Divisions 1 and 2, Class II Divisions 1 and 2, ATEX Zone 2 or Zone 22

Customizable

The EHS design library and fast track design services allow our team to efficiently tailor our products to meet the specific requirements of each application. During the design phase, the EHS engineering team analyzes the application to develop a custom and comprehensive material handling solution. By using standard options as well as custom-designed features, a GMP operator-centric design can be achieved. Various 3rd party components such as mills, RTP’s, or HEPA/carbon filters are often integrated into EHS equipment to provide a custom turnkey product or system of products.


Engineering drawings of EHS Solutions Material Transfer Station

Modular design for Material Transfer Station allows for multiple levels of containment

Modular Design

To increase the utility of this equipment, EHS has developed a quick and easy change over from an open transfer system (that uses a dust extraction device to capture fugitive dust) to a high-containment system that uses a flexible Restricted Access Barrier System (RABS). This modular design offers two levels of containment controls to accommodate the full span of compounds.

Transfer Modules are also designed to be quickly replaced in order to change between different types of receiving containers (example: change from a Drum to Drum Transfer Module to a Drum to Bag/Bottle Transfer Module).



Operator Centric Design

By designing around an analysis of operator movements during the drum charging process, an unmatched level of safety, operating simplicity, and functionality is achieved. A drum can be raised, lowered, and tipped into the proper position by using a single hand or foot control. This approach to drum handling allows the operator to easily control the product flow during the entire charging process.


Material Transfer Station by EHS Solutions is engineered with operator centric design.

Clean the entire Material Transfer Station

Cleanability

All exposed surfaces on the Material Transfer Station can be fully washed-down for cleaning. Some configurations of the Material Transfer Station include WIP spray-ball systems to wash the product contact surfaces.



Surface Finish

EHS Solutions offers several different Surface Finish options to fit your application needs.

Visit our GMP Compliance page to learn more.