GO BACK

Milling & Packout (A)

The final stage of many API manufacturing processes is a powder sizing or milling process. This can process can utilize a wide variety of sizing equipment. The milling process is sometimes integrated into the packout process during the final drying stage, but often this is an stand-alone process. Common challenges with this process are associated with the handling of the dry powders. The transfer and milling process can be very dusty and may require inerting depending on the properties of the powder.

EHS offers a drum handling and dust control system that allows the operator to safely transfer powder into the mill feed-chute as well as collect the milled powdered into a contained receiving drum.


key stat icon

<20μg/m³
Containment

key stat icon

30 seconds
Drum Tipping

key stat icon

200 kg
Capacity


Request
Drawing

Request
Brochure

EHS Solutions variable height drum tipper is right for pharmaceutical manufacturers interested in drum moving, drum dumping, drum lifting, drum tipping, etc.

Variable Height Drum Tipper

The EHS Drum Tipper addresses the ergonomic risk factors associated with manually dumping drums. Each Drum Tipper is designed to meet the specific requirements of the application (drum weight, discharge height, discharge reach, etc.). The dual stage Variable Height Drum Tipper is configured to serve a range of discharge heights. This is ideal for workplaces where one machine must serve multiple applications or where discharge heights exceed 60 inches.



Ventilation Sleeve

The EHS Ventilation Sleeve provides localized dust extraction to capture airborne dust and vapor. The full perimeter slot design provides 360 degrees of extraction to ensure that the required capture velocity is achieved across the entire opening of the Ventilation Sleeve. Each Ventilation Sleeve is engineered to interface with the equipment it serves. The Ventilation Sleeve can be offered as a standalone fixture or mounted on an articulating, height adjustable arm. These arms can be integrated with a portable cart or a wall mounted plate.

Several options are available to ensure the best solution for the application. These options include bag landing tables, bag disposal ports, integrated lids, custom adapter plates, and product grates.



Mobile Ventilation Sleeve

The EHS Ventilation Sleeve provides localized dust extraction to capture airborne dust and vapor. The full perimeter slot design provides 360 degrees of extraction to ensure that the required capture velocity is achieved across the entire opening of the Ventilation Sleeve. Each Ventilation Sleeve is engineered to interface with the equipment it serves.

The EHS Mobile Ventilation Sleeve allows the EHS Ventilation Sleeve to be portable and utilizes a simple linkage design that makes the height adjustable.

The integrated transport cart allows the Ventilation Sleeve to be easily moved from one location to another. A lift-assist mechanism attaches the Ventilation Sleeve to the transport cart, allowing the height of the Ventilation Sleeve to be adjusted.



EHS Solutions - Containment Equipment - Air Filtration Unit

Air Filtration Unit (Supporting Product)

EHS offers a complete line of portable and stationary Air Filtration Units that provide a local HEPA filtration device to serve Local Exhaust Ventilation (LEV) systems. The EHS Air Filtration Unit is designed to meet the utility requirements of multiple EHS Ventilation Sleeves; it is also a good fit for any application with similar extraction utility requirements.

Each system is configured to comply with international electrical standards. The GMP compliant design features a small footprint and noise rating of 76 dBa. Safe Change filters and activated carbon filters for VOC’s are also available.

EHS Air Filtration Units are a cost effective alternative to upgrading house exhaust systems that have become over utilized or where there is a need to prevent the contamination of the house exhaust system ducting.



Alternative Methods