Mobile Ventilation Sleeve


The EHS Mobile Ventilation Sleeve allows the EHS Ventilation Sleeve to be portable and utilizes a simple linkage design that makes the height adjustable.


Request Drawing

Request
Drawing

Request Brochure

Request
Brochure



Mobile Ventilation Sleeve

The integrated transport cart allows the Ventilation Sleeve to be easily moved from one location to another. A lift-assist mechanism attaches the Ventilation Sleeve to the transport cart, allowing the height of the Ventilation Sleeve to be adjusted.



Options

A variety of options are available for the EHS Mobile Ventilation Sleeve to ensure the final product meets the application needs.

The following are a selection of some of the options available:

  • Sleeve Shape Options [including round and elliptical]
  • Bag Landing Table
  • Dual Exhaust
  • Bag Disposal Port
  • Cart Configuration
  • Bag Liner Restraint Cage


This shows dust extraction and vapor control with the EHS Solutions Ventilation Screen

Dust Extraction

The integrated Ventilation Sleeve provides localized dust extraction to contain airborne dust and vapor. The full perimeter slot design provides 360 degrees of extraction to ensure that proper air velocity is maintained in the dust zone despite obstructions, such as an operator’s hands or a drum liner.



Customizable

The Mobile Ventilation Sleeve shape and size can be customized to fit most applications. The Mobile Ventilation Sleeve can be built to work with any application height.



Cleanability

The Mobile Ventilation Sleeve has a removable cover that provides wipe-down access to all surfaces of the sleeve.



Utility Requirements

The Mobile Ventilation Sleeve can be connected to any in-house dust extraction system or mobile dust collector/filter system. Utility requirements vary according to the diameter of the Mobile Ventilation Sleeve (airflow recommendations shown below).


Ventilation Sleeve Inner Diameter*
[Inches / Millieters]
Duct Size
[Inches / Millieters]
Extraction Air Flow Rate**
[SCFM / Liters Per Second]
Approximate Pressure Loss
[Inches WC / Millibar]
6-10 / 150-250 4 / 100 300 / 140 1.5 / 3.75
11-12 / 275-300 4 / 100 350 / 165 2 / 5
13-14 / 325-350 4 / 100 450 / 215 3.5 / 8.75
15-16 / 375-400 4 / 100 500 / 240 5 / 12.5
15-16 / 375-400 6 / 150 650 / 315 2 / 5
17-18 / 425-450 6 / 150 650 / 315 2 / 5
19-20 / 475-500 6 / 150 700 / 340 2.5 / 6.25
21-24 / 525-600 6 / 150 800 / 390 3 / 7.5
25+ / 625+ 6 / 150 Consult Engineering Consult Engineering

*For Elliptical Ventilation Sleeves, use equivalent circumference.

**Flow recommendations are calculated to provide:

• Capture Velocity [at center]: 150 ft/min (approximately)
• Duct Velocity: 3500+ ft/min


Weighing and Dispensing

The combined use of the EHS Side Mount Drum Tipper and Mobile Ventilation Sleeve is an ideal way to safely and simply weigh and dispense from one container into another. Usually this configuration is used with either and in-floor or bench scale for weighing.

The Side Mount Drum Tipper allows the operator to safely and quickly empty contents from one container to another. The Mobile Ventilation Sleeve is suspended just above the receiving drum to prevent interference with the weighing operation and collects airborne dust that would otherwise escape from the receiving drum. Both pieces of equipment are mobile to allow repositioning around a dispensary or other areas where the system would be used.



Surface Finish

EHS Solutions offers several different surface finish options to fit your application needs.

Visit our GMP Compliance page to learn more.


EHS Solutions offers multiple surface finished for GMP compliance. See the options side by side.